Sleipner PJC421, User Manual, Page: 13 / 52

13
6770 2 2021
-
PJC421 & PJC422
Control Panel - Menu Navigation
MC_0407
Set the running direction for the bow thruster.
• Normal (default)
• Swapped
Set the running direction for the stern thruster.
• Normal (default)
• Swapped
Bow Thrust
Direction
Stern Thrust
Direction
PHC-3 Confi guration
The proportional hydraulic controller PHC-3 has several parameters that can be confi gured. All these parameters are available for confi guration on the
PHC-3 controller’s display. See PHC-3 User Manual for more information, document ID 5267. Only the direction of thrust for PHC-3 can be confi gured
from TP-35.
Panel settings
Lists TP-35 serial number and fi rmware version.
Control Panel - Menu Navigation
MC_0407
Calibrate a connected single Danfoss PVREL joystick.
Calibrate a connected dual Danfoss PVREL joystick.
Calibrate a connected single Lilaas LE90/LF90/LF90X joystick.
Calibrate a connected dual Lilaas LE90/LF90/LF90X joystick.
Single Danfoss
PVREL
Dual Danfoss
PVREL
Single Lilaas
LE90/LF90/
LF90X
Dual Lilaas
LE90/LF90/
LF90X
Joystick settings
The Joystick Setting menu is used to calibrate the joystick. None will be displayed if no calibration has been done. If a calibration has been done, the
selected joystick type, calibration values, and live values will be shown.
Calibration values show the measured voltage from the joystick potentiometer for full port, centred and full starboard position of the joystick.
Live values show the measured voltage from the joystick potentiometer and percentage of thrust according to the current joystick position.
A new calibration is initiated.
Confi gure
Joystick