9
SRV(P)130_170_210
1.1.8 - 2017
6. The hatch can be cutted out either from outside or
inside the boat. If cutting from outside, it will be practical
to drill 4xØ3mm holes in each corner, so it will be easy
to make the cutting/reference lines from outside.
Fig. 7.
Fig. 7
EN
Step by step - Thruster installation - Hatch cutting
7. When cutting out the hatch use a suitable cutting
tool(with correct angle guide) and gently cut out the
hatch in accordance with
Fig. 8/b/c.
Fig. 8
Fig. 8b
Important! Ensure when completing the cutting,
that the hatch does not drop and get damaged.
Fig. 8c
Important! Cut the front and the back
sides of the hatch according to Fig.
8b(Side View). The front cut at 30
o
cham-
fer is for optimal release of the hatch.
Bow is indiacated as the direction of
travel.
Important! Cut the illustrated sides in a
45
o
chamfer according to Fig. 8c.
Side View
Front View
Bow
Stern
