manualshive.com logo in svg

SkyWave IDP-782, Hardware Manual, Page: 12 / 87

Share
Download
SkyWave IDP-782 Hardware Manual Download Page 12

IDP-782 - Hardware Guide

[N201]

IsatData Pro Gateway Web Service User Guide

[N206]

MTWS Cellular Protocol

[T202]

IDP Terminal API Reference

[T203]

IDP Modem Developer Guide

[T204]

IDP Terminal User Guide

The following software tools are available from the IDP Toolkit or from

support.skywave.com

.

l

Console

Safety Disclaimer

SkyWave makes no warranties, representations or guarantees that the products and network services are

suitable for any use in any hazardous environments requiring fail safe performance (including without

limitation marine safety and distress systems, operation of nuclear facilities, aircraft navigation or

communications systems, weapons systems, air traffic control and life support services) or any other

application in which the failure of the products or network services could result in death or personal injury.

Solution Providers assume all liability associated with selling any products and network services for any

such applications, and Solution Provider will defend, indemnify, and hold SkyWave harmless against any

claims against SkyWave for loss, damage, liability, or expense (including lawyers’ fees) arising out of or

related to the sale by Solution Providers or any Solution Provider Reseller, or the user by any end user, of

any product or network service.

Please read all cautions and warnings throughout this document.

Safety Precautions

The terminal must comply with all safety precautions relating to the operation, usage, service and repair of

the terminal. SkyWave assumes no liability for the customer’s failure to comply with any of these

precautions.

Caution warnings appear throughout this document.

Installation Warning

SkyWave recommends that this product be installed by the authorized distributor from whom it has been

purchased. By carrying out the installation of the product, the installer assumes exclusive responsibility for,

and agrees to indemnify SkyWave from, any injury or damage of any kind arising from the installation.

T213, Version 02

12

© SkyWave Proprietary

Summary of Contents for IDP-782
























































































Reviews:

No comments