Trouble
Reasons
Solution
No alarm when triggered
in the locked mode
moved by others
No vibration detect
function
2. The strength of vibration is low
2. More than 0.6 kilogram impact force will cause the vibration
Can’t unlock
Can’t lock
1. Low battery
2. Lock bar gets stuck
1. Check battery, when battery voltage is low, change new
batteries, alkaline battery is suggested.
2. Check whether the lock bar gets stuck
batteries, alkaline battery is suggested.
1. Battery cover is
loose.
1.
Tighten screws securely in the cover.
2. Make sure the cable is plugged in lock hole and deep enough
3. Set off the vibration detect function when belongings are easily
2
. The cable is not
pushed in far enough.
3. Vibration detect function is off
1. Vibration detect function is off
.
1. Check whether the vibration detect function is on
1. Wrong password
1. Check whether the passwor
d entere
d is
correct
.
2. Low battery
2.Check battery, when battery voltage is low, change new
3
. Lock bar gets stuck
3
.
Check whether the lock bar gets stuck
1. In order to reduce risks and losses, change new batteries immediately, when battery voltage is low. If you do not use the unit for a long
time, please remove the battery to avoid battery leakage.
2. If ice or sleet is accumulated on the lock remove ice near the lock bar, this may cause the lock bar get stuck.
3. The lock does not have a memory. If the battery is changed or is discharged ,the password and setup will reset to initial factory setting(factory
setting password ‘1234’,vibration detect function is on) Please reset the password as soon as possible.
