Installation Manual -
Security Device
Operating your SkyVue Alarm
The SkyVue alarm is designed to help protect your personal
property and yourself using different “snap-in” adapters.
Adapters: The adapters snap into the SkyVue alarm as
Illustrated in Fig. 3.
NOTE: You cannot insert or remove the adapters with the
cover shut and locked.
Alarm Test: You can test the alarm by inserting one pin of the
adapter into the left side pin hole. The alarm will sound and
the ultra bright lights will flash.
Lights: Your SkyVue alarm has three light settings.
The “OFF” setting is for no lights.
The “WARNING” setting will turn on the slow blinking light
(to show alarm is armed)
The “FLASHER” setting will activate the pulsating safety
flashers.
Mounting to a Wall (Tilt Mount)
Mounting to Post or Cart (40”, 46”, & 52”)
*IMPORTANT NOTE
: ENSURE CABLE IS WOUND THROUGH THE PLATE AND BRACKETS. WALL
MOUNT USES HOLES UNDERNEATH PLATE AND POST APPLICATIONS USE THE EXISITING HOLES.
4
2
All Rights Reserved.
2020
Sky
Vue
Batteries installation
a). Unscrew the battery cover to install three alkaline batteries,make sure
installed correctly (Fig1), screw the battery cover back on.
b). After the battery installation, the unit will sound ‘Beep Beep’, and the LED will
flash 1 to 2 sec.
c). Make sure the screws are tightened securely prior to using.
