Installation Manual -
Security Device
Congratulations you have succesfully installed your
SkyVue Security Alarm. If you have questions feel free to contact our
technical support team
(877) 475-9883
s
ecurIty
D
evIce
I
nstallatIon
M
anual
|
5
The
alarm is very loud, never put it close to your ear.
The security alarm can provide valuable protection for your TV,
however it does not guarantee complete protection from any losses.
Please take care of all of your property.
To assure safety please change your password when you replace the
battery each time
. The factory setting password ‘1234’).
a). Make sure the unit
is not in the LOCK mode.
b). Press and hold the [1] button
for 2 seconds, unit will sound a ‘Beep’ tone and the LED will
flash
c). Key in the o
riginal password (default password ‘1234’) ,the unit will beep once.
Please key in 4 digits new password (the password must
be 4 digits), after the passwords input
completed, the
unit will beep 3 times to confirm the password change is successful.
Note: Remov
al of the battery, the password and setup will reset to initial factory setting ‘1234’.
If forget your password, please ta
ke the batteries out and press the button for more than
5 seconds, the password and setup will reset to
initial factory setting ‘1234’.
2. Programmable Vibration Detect Function ON or OFF(The unit initially factory set vibration
detect function ON.)
a). Make sure the unit not in the LOCK mode.
b). Press and hold [2] button 2 seconds will hear a‘B
eep’, the vibration detect function set
to Off
c).
When you press and hold the number [2] button for 2 seconds again, will hear short ‘Beep
B
eep’, vibration detect function set at ON.
