Skyvue IGP-32, Assembly Manual

Page: 19 / 23

17
P
ost
t
ilt
M
ount
nXG 3250 / nXG 4250 / nXG 4650
|
1. With U-bolts threaded through the mounting plates, place
stainless steel flat washers over the bolt ends.
2. Place stainless steel lock washers over bolt ends.
3. Thread black powder coated nuts over bolt ends and hand tighten.
See figure 3a for suggested mounting plate placement.
4. Once positioned, level and tighten all U-bolt nuts on mounting
plate.
5. Place rubber bolt caps over exposed bolt ends
U-Bolts and
Mounting Plate Assembly Cont.: