18
All Rights Reserved.
Sky
Vue
®
2. The TV’s tuner is designed for HDTV therefore requires a stronger signal than
normal TVs. If you cannot achieve that signal level with your antenna or cable,
the TV might lose picture or sound.
Connecting to Cable or Antenna through VCR
1. Make sure the power of the TV is turned off.
2. Make sure there is an antenna or cable connection to the VCR already.
3. Use a Coaxial RF cable and connect from your VCR’s Antenna Out or
Output to TV to the ATSC/NTSC input of your TV.
4. Turn on the TV.
5. Select TV (Air) for antenna or TV (Cable) for digital cable from either
your remote control’s input
button or input button on the TV.
6. Use the On-Screen Display to scan for channels.
Please Note :
1. Some VCRs must be turned On before its output will have a signal to the TV. Please consult your VCR manual for
further reference.
2. Not all broadcasts are in High Definition (HD). Please refer to your local broadcasting stations for more information.
3. This model’s tuner is designed for HDTV therefore
it requires a stronger signal than normal TVs. If you
cannot achieve that signal level with your antenna or
cable, the TV might lose picture or sound.
4. This TV will turn off automatically if there’s no signal
present for more than 15 minutes.
Connecting to a DVD/Blu-ray Player
Connecting with HDMI Cable (Best
Option)
1. Make sure the power of the TV and your DVD/
Blu-ray player is
turned off.
2. Connect a HDMI cable to the HDMI port of your DVD/Blu-ray player and the other end to the HDMI port off
the back of your TV.
3. Turn on the TV and your DVD/Blu-ray player.
4. Use the remote control’s input button or the input button on the TV to switch to HDMI.
Please Note :
1. Refer to the DVD/Blu-ray player’s manual to make sure the DVD/Blu-ray player is configured to output correctly to the
TV.
Located on Back of TV
DVD/Blu-ray
DVD/Blu-ray
Located on Back of TV
