19
Owner’s Manual -
Model
NXG-4970-DS | C-NXG-4970-DS
TV I
nsTallaTIon
& C
onneCTIons
|
2. This TV does not decode Bit stream digital audio, so make sure the
DVD/Blu-ray is setup for PCM digital audio through HDMI.
3. If HDMI 1 is occupied, use HDMI 3 as your connection
port.
Connecting with Component
1. Make sure the power of TV and your DVD/Blu-
ray player is turned off.
2. With a Component Cable, connect the green
connector to the DVD/Blu-ray player and
Component green connector port on the TV.
3. Connect the blue color connector to your DVD/
Blu-ray player and Component blue connector
port on the TV.
4. Connect the red color connector to both your DVD/Blu-ray player and Component red
connector port on the TV.
5. With an RCA Audio Cable, connect the white color connector to both your DVD/Blu-ray
player and Component white connector port
on the TV.
6. Connect the red color connector to both your DVD/Blu-ray player and
7. Component red connector port on the TV.
8. Turn on the TV and your DVD/Blu-ray player.
Use the remote control’s input button or the
input button on the TV to switch to YPbPr.
Please Note :
1. Refer to the DVD/Blu-ray player’s manual to make
sure the DVD/Blu-ray player is configured to output
correctly to the TV.
2. This TV will turn off automatically if there’s no signal
present for more than 15 minutes.
Connecting with Composite
1. Make sure the power of the TV and your DVD/
Blu-ray player is turned off.
2. Obtain a Yellow Video Cable. Connect the
Yellow Video connector to both your DVD/
Blu-ray player and Composite’s Yellow Video
connector port off the back of
your TV.
3. Obtain a RCA Audio Cable. Connect the white
color connector to both your DVD/Blu-ray
player and Composite’s white connector port
off the back of your TV.
Located on Back of TV
Cable Box
Satellite
OR
Located on Back of TV
DVD/Blu-ray
