22
All Rights Reserved.
Sky
Vue
®
Please Note :
1. Refer to the set-top box’s manual to make sure the set-top box is configured to out-
put correctly to the TV.
2. This TV will turn off automatically if there’s no signal present for more than 15 min-
utes.
Connecting to an External Amplifier or
Amplified Speakers
Connecting with Digital Coax (Best Option)
1. Make sure the power of the TV and your receiver is turned off.
2. Obtain a Coaxial SPDIF cable, connect it to your receiver’s Coaxial
SPDIF digital input and the Digital Audio Out port on the back of the TV.
3. Turn on the TV and your receiver.
Please Note :
1. If you want pure digital stream for your receiver to decode, you must also configure the TV’s OSD Sound->Digital Audio
Out function. Make sure the option is on Bit Stream.
2. If your receiver is making static noises when receiving Bit Stream, you must
use the PCM option instead.
3. Refer to the receiver’s manual to make sure the receiver is configured to
receive signals correctly from the TV.
Connecting with RCA Audio Analog
(For use when Skyvue Speakerbar is not in use)
1. Make sure the power of the TV and your receiver is turned off.
2. Obtain a 3.5mm stereo/audio cable (if your amplifier audio connec-
tion requires RCA audio out jacks you will need to obtain an 1/8”
Stereo Mini Plug to RCA adapter cable). Connect it to your receiver’s
audio input
connection and the 3.5mm stereo/audio connection on the Analog Audio port on the back of the TV.
3. Turn on the TV and your receiver.
Located on Back of TV
Located on Back of TV
