12
All Rights Reserved.
Sky
Vue
®
Unpacking
After unpacking the SkuVue Outdoor TV, please make sure that the following items are included in the carton and
that they are in good condition. If items are damaged or missing, contact your dealer immediately.
Rear Panel Component Source
WARNING: Do not connect the power source before making connections.
Internal Component Source
The Internal Component Source allows you to easily connect to the Audio, Video, Digital Audio Out, HDMI, Audio
Out, and RF connectors.
1. The Internal Component Source is inside the Component Cover located on the back of the unit.
2. Loosen the 6 thumbscrews located on the back cover of your SkyVue TV , and slide the cover toward the
left to reveal the Component Source.
3. Route cables to the proper inputs, and place the cable cords over the Rubber Sealing Gasket.
4. Close the cover.
5. Press firmly on the cover, and tighten the thumbscrews.
Rear Panel Connections
1. RS-232C
- Long established standard connection (“C” is the current version) that describes the physical
interface and protocol for relatively slow data communications between computers and related devices.
2. Headphones Out
- Use a 3.5 mm mini-jack for use with standard headphones.
3. USB -
The USB and high speed serial port allows viewers access to files stored on a USB memory device.
See
“Using USB” Sections for further details.
4. HDMI 3
- Same as HDMI 2
Please note: This port does not support MHL devices.
1
5a (Optional)
2
3
4
5
6
7
8
10
11
9
12
13
