Skytech: 3301P2
REV. 5-7-12 Page 3
1. LOW BATTERY ICON
- Battery power is low when icon
appears. Replace batteries within 2-weeks.
2. MODE
- Indicates operation mode of system.
3. FLAME
- Indicates the burner/valve in operation or turned ON.
4. ROOM
- Indicates CURRENT room temperature.
5. SET
- Indicates desired SET room temperature in Thermo
operation.
6. FAHRENHEIT/CELSIUS
– Indicates degrees Fahrenheit or
Celsius.
7. DAY OF WEEK
– Indicates current day of week, or program
segment when editing program settings.
8. PROGRAM ON/OFF
– Indicates when Program 1 (P1) is
ON or OFF, and indicates when Program 2 (P2) is ON or OFF.
9. TIME and PROGRAM TIME
– Indicates current time or
program time setting when editing program settings.
LCD – LIQUID CRYSTAL DISPLAY
BASIC TRANSMITTER FUNCTIONS
To operate the transmitter, first press the MODE button until the LCD screen reads OFF in
the display (Fig. 8).
Step 1
: Press the MODE button one time to manually turn
ON
the appliance (Fig. 9).
Step 2:
Press the MODE button a second time to put the system in
THERMO
mode
(See Fig. 10).
Step 3:
Press the MODE button a third time to turn the appliance back
OFF
again as
show in Fig. 8.
DOWN
UP
MODE
SET
PROG
COVER OPEN
Fig. 7 Mode Button use.
Fig. 6 LCD Display Screen.
Fig. 8 OFF Mode
Fig. 9 Manual ON
Fig. 10. Thermo Mode
This remote control system can be thermostatically controlled when the transmitter is in the THERMO mode (THERMO
must be displayed on the screen). To set the desired room temperature, press the MODE button to place the transmitter
into THERMO mode, then press the UP or DOWN buttons to select the desired room temperature. The highest set
temperature is 99 ºF (32 ºC). The lowest set temperature is 45º F (7 ºC).
NOTE:
The THERMO feature operates the appliance whenever the room temperature varies a certain number of degrees
from the set temperature. This variation is called the “swing” or temperature differential. This feature lets the appliance
turn off and on 2 ºF (1 ºC) above or below the set temperature of the room. This is to cushion the number of times the
appliance is turned ON and OFF. See page 9 to adjust the swing temperature.
THERMO UPDATING FEATURE - TRANSMITTER
When in THERMO mode, the transmitter reads the ROOM temperature every 2 minutes, checks the room temperature
against the SET temperature then sends a signal to the receiver.