Skytech: 3301P2
REV. 5-7-12 Page 2
2.
Press and hold the
SET
button for 5 seconds. The
hour section will begin to flash (Fig. #2). Use the UP
and DOWN buttons to select the hour, then press
SET
to
confirm your setting.
3.
The minutes will be flashing. Use the UP and DOWN
buttons to select the minutes, the press
SET
. (Fig. #3) to
confirm your setting.
4.
The AM PM will be flashing. Use the UP and DOWN
buttons to select AM or PM, then press
SET
(Fig. #4) to
confirm your setting.
5.
One of the days of the week will be flashing (above
the clock). Select what day it is by pressing the UP and
DOWN buttons, then press
SET
. Your time will automati-
cally be accepted (Fig. #5) to confirm your setting.
DOWN
UP
MODE
SET
PROG
COVER OPEN
Fig. 2 Setting Hours
DOWN
UP
MODE
SET
PROG
COVER OPEN
Fig. 3 Setting Minutes
DOWN
UP
MODE
SET
PROG
COVER OPEN
Fig. 4 Setting AM/PM
DOWN
UP
MODE
SET
PROG
COVER OPEN
Fig. 5 Setting Day of Week
SETTING ºF / ºC SCALE
The factory setting for temperature is ºF (Fahrenheit) . To change this setting to ºC (Celsius) , press and hold the
UP
button and the
DOWN
buttons on the transmitter at the same time. Follow this same procedure to change from
ºC (Celsius) back to ºF (Fahrenheit).
