Skytec 110 IR, User Manual

Page: 9 / 52

9
Hardware Description
1. Front Panel Configuration
1. POWER BUTTON : Press to switch between STANDBY and POWER ON modes .
2. CH Up/Down BUTTON : Press to change services in normal mode, or to move highlighted-bar in
menu mode.
3. Display : The 4-digit shows service number or menu state in normal mode. Show local t ime in
standby mode.
4. Remote Sensor : Receives signal from remote controller.
5. STANDBY Indication LED(RED) : The LED lights on in standby mode.
REMOTE Indication LED(GREEN) : The LED lights on when a key on the Remote Control is pressed.
6. USB (Front) : Use it when connect ing to external USB storage device.
7. SMART CARD READER : Insert smart card for encrypted service access.