39
2.6
A/V Output Setting
TV Type :
Select the TV types.(
PAL/NTSC/Auto
) In Auto mode, the STB is automatically selected to
NTSC or PAL accordingly to the service played.
TV Aspect Ratio :
Select the aspect ratio of TV which is
connected to the STB
(4:3/16:9).
This menu must be set prior
to selecting the Display Format function.
Display Resolution :
Select the Display Resolution of the
screen by using
ARROW
or
OK
button. You can also change the
resolution with
Resolution
button in the remote. Each time you
press the
Resolution
button, the resolution changes in the
following sequence:
576i > 576p > 720p > 1080i > 1080p.
NOTE : Please note that your TV may not show a picture depending on the Display Resolution set by
your STB as well as if set to PAL when NTSC is required or vice versa. If you set the Display
Resolution as HD(more than 576p), your TV cannot display anything when the TV is
connected to the Composite Video output of the STB. In case of HDMI, your TV can display a
picture for all of the resolution settings of the STB. But it is also possible that your TV may not
display a picture with 576i, because some HDTV’s does not support 576i.
Display Format :
In case of a 4:3 ratio TV set, you can select
Letter Box
or
Pan&Scan.
In case of a 16:9
ratio TV set, you can select
Pillar Box
or
Full Screen.
-
16:9 Display format on 4:3 TV set
Letter Box :
You can see the full screen of 16:9, but top and bottom edges of your TV screen
display black horizontal Pillars.
Pan&Scan :
The picture is displayed in full on your 4:3 TV screen, but left and right sides of the
original picture cannot be displayed.
-
4:3 Display format on 16:9 TV set
Pillar Box :
You can see the full screen of 4:3, but left and right sides of your TV screen display black
vertical Pillars. 4:3
Full Screen :
The picture is displayed in full on your 16:9 TV screen, but left and right sides of the
original picture is displayed with widening of the screen from left and right.
Because of the artificial widening, the TV picture will be distorted.
Video Output Mode :
According to Display Resolution, you can select the
Video Output Mode.
-
In case of More than 576p(HD) :
The
‘RGB’
output will be disabled automatically.
HDMI Dolby Digital :
Set the Dolby Digital mode
'On'
or
'Off'
in status of HDMI output.
Dolby Digital Default :
Set the Dolby Digital Default mode
'On'
or
'Off'.
If you set
'On'
, Dolby Audio
will play on the service that support Dolby Audio.
Sound Mode :
Set the audio mode output among the RCA jack, optical SPDIF and HDMI
(Stereo/Mono/Left/Right).
Power Saving in Standby Mode
-
‘On’ :
Front window displays clock besides standby red LED in case of standby mode.
-
‘Off’ :
Front window only displays standby red LED in case of standby mode.
Audio Sync Delay :
To adjust Audio Sync. You can adjust from 0ms to 400ms.
Summary of Contents for 110 IR
