Skytec 110 IR, User Manual

Page: 35 / 52

35
1.4 Data Transfer
When the data transfer task is in process, the Front USB slot is
set to a default device slot. But, if no USB device is connected
on a front USB slot, then the Rear USB slot is set as a device to
be used for the data transfer process.
NOTE : If no USB device is connected on either two
(Front & Rear) USB slots, then a Menu item will
not be available.
Transfer all System data to USB storage : If you want to transfer and use BOTH of the current system
parameters and service data in the future, this menu will allow you to store all data to your USB device.
Press
OK button to store all current data to an external USB storage.
Transfer Service data to USB storage : If you want to transfer and use ONLY the service data in the
future, this menu allows you to store current service data. Press the OK button to store the current
service data to your external USB storage. The service data can also be viewed and edited on a PC with
an appropriate editor (DrEdit) for the file saved.
Data download from USB storage device : This menu allows you to download the saved data from the
external USB storage to your STB. Press OK button to download data.