8
2.2 Previous Operation
Before using the equipment, you must wash all parts that will be in contact with the product
that will be processed, with water and mild soap (please red the item 3.4 Cleaning).
Check if the equipment is stable in its working place.
2.2.1 Cup Positioning
The Cup Nº.03 (Pic. 01) has a versatile fixing system that allows it to be fixed in a simple,
agile and safe way.
To remove and place the Cup Nº.03 (Pic. 01) you only need to pull it up through its handles.
Always take out the Cup holding it steady through its handles.
IMPORTANT
Never remove and place the Cup Nº.03 (Pic. 01) with the equipment turned on.
2.2.2 Lid Positioning
The Cup Nº.03 (Pic. 01) has a Lid Nº.02 (Pic.01) developed of nontoxic material that offers
an efficient sealing during processing.. Observe if the Lid is properly positioned along the
edge of the Cup as per below picture:
IMPORTANT
Make sure that the tension of the power outlet where the equipment will be
installed matches the tension indicated in its label that is in the power cable.
PICTURE 02
