14
equipment.
- Never change the original characteristics of the equipment.
- Do not dirty, break or remove any safety or identification label. If any label is unreadable
or missing, request another label to the closest Authorized Technical Assistance.
4.2 Care and Observations before Starting the Equipment:
IMPORTANT
Read intently and carefully the INSTRUCTIONS contained in this manual before
stating the machine. Make sure that you understood correctly all the information.
In case of any doubt (s), consult your superior and / or the Vendor.
4.2.1 Danger
Electrical cables or wires with damaged electrical insulation may produce leakage of
electrical current and cause electrical shocks. Before using them, verify their conditions.
4.2.2 Warnings
Make sure that all INSTRUCTIONS contained in this manual are completely understood.
Each function or operational and maintenance procedure must be totally clear.
Starting a manual command (button, keys, electrical switches, levers, etc.) must be done
always when user is sure of what is the correct command.
4.2.3 Cautions
The electrical power cable, responsible for feeding the machine, must possess enough
area to handle the consumed electrical power.
The electrical cables that remain on the floor or by the machine, need to be protected to
avoid short-circuit.
4.3 Routine Inspections
4.3.1 Warning
When verifying the tension of belt(s) / chain(s), DO NOT put your fingers on the belt(s),
chain(s), nor in the gear(s).
4.3.2 Cautions
Verify the motor(s) and the sliding and rotating parts of the equipment, whenever there
are abnormal noises.
Verify the tension of the belt(s) / chain(s) and replace the set, whenever any belt / chain /
gear present wear.
