15
When verifying the tension of the belt(s) / chain(s), DO NOT put your fingers on the belt(s),
chain(s), nor in the gear(s).
Always verify protection and safety devices so that they will function correctly.
4.4 Operation
4.4.1 Warnings
Do not work with loose hair that may touch any part of the machine, as it may cause
serious accidents. Tie it up and behind, or cover it with a scarf.
Only trained and qualified users must operate the equipment.
NEVER operate the equipment with any of its safety accessories.
4.5 After Finishing the Operation
4.5.1 Cautions
Always clean the equipment after using it. For that, disconnect it from the electrical outlet.
Never clean the machine until its COMPLETE STOP. Replace all machine components before
turning it on again.
Verify the fluid levels.
When verifying the tension of the belt(s) / chain(s), DO NOT put your fingers on the belt(s),
chain(s), nor in the gear(s).
4.6 Maintenance
4.6.1 Dangers
With the equipment turned on, any maintenance operation is dangerous.
TURN OFF THE EQUIPMENT PHYSICALLY FROM THE ELECTRICAL OUTLET, DURING ALL THE
MAINTENANCE OPERATION.
IMPORTANT
Always remove the plug from the power outlet in any emergency situation.
4.7 Warnings
Qualified people must do the electrical or mechanical maintenance.
The person in charge of the maintenance must make sure that the equipment will operate
under TOTAL SAFETY conditions.
