Door Control:
Press this button to open / close the garage door.
Light Control:
Press the light button to turn the garage door opener
light on or off. Once it is turned on, it will stay on until this
light button is pressed again. The garage door opener
light will also be on during a door open / door close cycle,
it will stay on for approximately 3 minutes.
Remote Lock:
Slide to the lock position to disable the garage door
opener from being activated by remote controls and wireless keypad.
Slide to the unlock position to resume normal operation.
Auto-Close Timer:
Auto-Close Timer allows the garage door to be
closed automatically after a specific period of time. This feature can only
be used for sectional door. It CANNOT be used on one-piece door. To
disable Auto-Close Timer, place the slide switch setting to “Off” position
to disable this feature.
To enable Auto-Close Timer, place the slide switch to the desired time
setting, this is how long the door will remain open before auto closing:
3 – 3 Minutes
10 – 10 Minutes
30 – 30 Minutes
1) If Auto-Close Timer is enabled, the timer will start once the door is
open. The LED display will show “A” to indicate Auto-Close Timer is
counting down.
Door Control
Light Control
Remote Lock
Auto-Close Timer
For LCD Wall Console operations,
please refer to its instructions.
The garage door opener will emit beeping and flashing alert before closing
the door. If the garage door cannot be closed completely due to any reason,
such as obstruction is detected, or safety beam sensors being blocked, the
opener will try to close it for up to 5 times. When the obstruction or safety
beam sensors are clear, the opener will close again when activated.
2) If you would like to disable Auto-Close while it is counting down, press the
door control button once. It will disable the Auto-Close for that cycle. Pressing
the door control button again will close the door immediately.
Deluxe Wall Console offers 4 functions:
30
OPERATION
