SJIII Series E -
The CONVENTIONALS
118931AH
May 2002
SECTION 1, Page 8
Warning
Work Platform Conditions
An Operator Should Not Use Any
Work Platform That:
•
Has ladders, scaffolding or other devices
mounted on it to increase its size or work
height.
•
Does not have a clean, uncluttered work area.
•
Does not appear to be working properly.
•
Has been damaged or appears to have worn
or missing parts.
•
Has alterations or modifications not approved
by the manufacturer.
•
Has safety devices which have been altered or
disabled.
Operator Warnings
Warning
DO NOT
exert excessive side forces on platform
while elevated.
DO NOT
overload, the lift relief valve does not
protect against overloading when the
platform is elevated.
DO NOT
alter or disable limit switches or other
safety devices.
DO NOT
exceed the rated capacity of your scissorlift
and make sure the load is evenly
distributed on the platform.
DO NOT
raise your platform in windy or gusty
conditions.
Warning
Jobsite Hazards
DO NOT
operate on surfaces not capable of
holding weight of the work platform
including the rated load, e.g. covers,
drains, and trenches.
DO NOT
elevate the work platform if it is not on
firm level surfaces. Avoid pot holes,
loading docks, debris, drop offs and
surfaces that may affect the stability of your
work platform.
DO NOT
climb or descend a grade steeper than
25% . Elevated driving must only be done
on firm level surfaces.
BE AWARE
of overhead obstacles, and poorly lit areas
in case of overhead obstacles.
ENSURE
that there is no person(s) in the path of
travel.
Optional Accessories
The SKYJACK SJIII Series Work Platform is designed
to accept a variety of optional accessories. These
are listed in
Standard Features and
Optional Equipment. Operating instructions for these
options (if required) are located in Section 2 of this
manual.
