Page 28
December 2007
Rough Terrain Scissors
Function Tests
Section 2 - Familiarization
It is the responsibility of the operator to read, completely understand and follow all instructions and warnings
contained in this operating manual and on the aerial platform.
Torque Switch
Engine Start
Pushbutton
Horn
Pushbutton
Glow Plug
Pushbutton
Lift Enable
Pushbutton
Emergency Stop
Button
Low/High Throttle
Switch
Operation Light
Off/Lift/Drive Key
Switch
Low/High Speed Range
Switch
Drive/Steer
Controller
Raise/Off/Lower
Switch
Drive/Steer Enable
Trigger Switch
Rocker Switch
•
Test Enable Trigger Switch
1. Ensure outriggers are fully retracted. Refer
to
Section 3.8-10
for hydraulic outriggers
operation.
2. Ensure path of intended motion is clear.
3. Select off/lift/drive key switch to “
”
drive position.
4. Without activating “
” enable trigger
switch, attempt to drive and steer the aerial
platform.
Result:
Drive and steer functions should
not operate.
•
Test Steering
1. Activate and hold enable trigger switch,
and then press rocker switch on top of
controller to “
” left and “
”
right.
Result:
Steer wheels should turn left and
right.
•
Test Horn
1. Push “
” horn pushbutton.
Result:
Horn should sound.
•
Test Driving
1. Ensure path of intended motion is clear.
2. Activate and hold “
”enable trigger
switch.
3. Slowly move controller fully
” forward,
and then return handle to center
position.
Result:
Aerial platform should move in
forward direction, and then come to a
stop.
4. S l o w l y m o v e c o n t r o l l e r f u l l y “
”
backward, and then return handle to center
position.
Result:
Aerial platform should move in
reverse direction, and then come to a
stop.
F
AMILIARIZA
TION
