Rough Terrain Scissors
December 2007
Page 27
Section 2 - Familiarization
Function Tests
It is the responsibility of the operator to read, completely understand and follow all instructions and warnings
contained in this operating manual and on the aerial platform.
Torque Switch
Engine Start
Pushbutton
Horn
Pushbutton
Glow Plug
Pushbutton
Lift Enable
Pushbutton
Emergency Stop
Button
Low/High Throttle
Switch
Operation Light
Off/Lift/Drive Key
Switch
Low/High Speed Range
Switch
Drive/Steer
Controller
Raise/Off/Lower
Switch
Drive/Steer Enable
Trigger Switch
Rocker Switch
9. Select low/high throttle switch to “
” low
throttle position.
CAUTION
Do not start the engine in the high
throttle position.
10. If diesel engine is cold, depress and hold
“
” glow plug pushbutton for 15 to 20
seconds.
11. Depress and hold “
” engine start
pushbutton to start the engine.
•
Test Emergency Stop
1. Push in “
” emergency stop button.
Result:
Engine should shut down and
aerial platform functions should not
operate.
•
Test Lift Enable
1. Pull out “
” emergency stop button.
2. Restart the engine.
3. Select and hold raise/off/lower switch to
“
” raise position without pressing lift
“
”
enable pushbutton.
Result:
Platform should not rise.
•
Test Platform Raising/Lowering
WARNING
Be aware of overhead obstructions
or other possible hazards around the
aerial platform when lifting.
1. Press and hold lift
“
”
enable pushbutton,
then select and hold raise/off/lower switch
to “
” raise position and raise the
platform to an approximate height of 0.5
meter. Release switch to stop.
Result:
Platform should rise.
2. Press and hold lift
“
”
enable pushbutton,
then select and hold raise/off/lower switch
to “
” lower position and lower the
platform fully. Release switch to stop.
Result:
Platform should lower.
F
AMILIARIZA
TION
