Skyjack SJ 3220, Service Manual

Page: 25 / 177

25
SJ3220, SJ3226, SJ4720, SJ4726, SJ4732 223198ABA
Platform Inspection Section 1 – Scheduled Maintenance
1.8 Platform Inspection
WARNING
Fall Hazard. Use the three points of contact
principle when you use the MEWP to enter or exit
the platform. If you do not obey, there is a risk of
death or serious injury.
1.
Enter the platform and close the gate.
1
Railings and gate (B)
▪
Make sure there are no loose or missing parts,
and there is no visible damage.
▪
Make sure that the lock-pins and fasteners are
correctly locked.
▪
Make sure that the
platform railings are in the
correct position and locked with lock-pins.
▪
Make sure that the
gate
is in good condition and
operates correctly.
▪
Refer to 5.2-3 Railing Maintenance and Repair
for
the railing maintenance information.
2
Fall-protection anchorages (B)
▪
Make sure that the fall-protection anchorages are
correctly installed.
▪
Make sure there is no visible damage.
3
AC power socket (B)
▪
Make sure there is no visible damage.
4
Platform control console (B)
▪
Make sure that the control console is locked with
lock-pins.
▪
Make sure that the platform control cable is
correctly locked, and there is no visible damage.
▪
Make sure all the switches operate correctly.
5
Manual storage box (B)
▪
Make sure that the operation manual and other
important documents are in the manual storage
box.
▪
Make sure that the documents are in good
condition, and you can read them.
▪
Always put the manuals and other documents
back in the storage box after use.
6
Extension platform (B)
▪
Make sure that the extension platform is correctly
installed.
▪
Make sure there is no visible damage or missing
components.
▪
Make sure the lock-pins are correctly attached.
2.
Use the MEWP ladder to exit the platform.
1
4
5
3
2
2