Skyjack 3215 SJIII Compact Series, Operating Manual

Page: 46 / 104

Page 46 December 2007
SJIII DC Electric
Start Operation Section 3 - Operation
3.8-5 To Drive Forward or Backward
WARNING
Be aware of blind spots when operating
the MEWP.
WARNING
Ensure that there are no personnel
or obstructions in the path of travel,
including blind spots.
1. Activate platform control console (refer to
Section 3.8-3 ).
2. Select lift/off/drive switch to “ ” drive position.
3. Activate and hold “ ” enable trigger switch.
4. Move controller handle “ ” forward/up or
“ ” backward/down to desired speed and
direction of MEWP travel.
5. Return controller to neutral center position to stop.
Release “ ” enable trigger switch.
WARNING
To protect against unintended movement
of the MEWP, push in the emergency stop
button after you have arrived at your
desired location or elevation.
3.8-6 To Steer
1. Activate platform control console (refer to
Section 3.8-3 ) .
2. Select lift/off/drive switch to “ ” drive position.
3. Activate and hold “ ” enable trigger switch.
4. Press “ ” rocker switch on top of controller
handle in either direction to steer.
NOTE
Steering is not proportional. Driving and
steering may be active at the same time.