Skyjack 3215 SJIII Compact Series, Operating Manual

Page: 38 / 104

Page 38 December 2007
SJIII DC Electric
Component Identification Section 3 - Operation
3.5 Component Identification
The following descriptions are for identification,
explanation and locating purposes only.
3.5-1 Electrical Panel
This panel is located in the hydraulic/electric tray. It
contains the following controls:
2 1
Figure 3-1. Electrical Panel
1. Circuit Breaker Resets - In the event of power
overload or positive circuit grounding, the circuit
breaker pops out. Push the breaker back in to
reset.
2. Hourmeter - This gauge records accumulated
operating time of the MEWP.
3.5-2 Battery Charger
The charger is located at the rear of the base or inside
the battery tray. Refer to
Section 3.13-2 for battery
charging operation.
Figure 3-2. Battery Charger
3.5-3 Pothole Protection Device
1
Figure 3-3. Pothole Protection Device
1. Pothole Protection Device - This device consists
of a set of mechanically actuated steel weldments
located under the hydraulic/electric tray and
battery tray. These weldments will automatically
rotate for reduced ground clearance when
elevating the MEWP. If the pothole protection
device has not fully lowered, the drive function
will be disabled.
WARNING
Crushing Hazard - Personnel on ground
must stay clear of pothole protection
device.
WARNING
Do not drive elevated in areas where
electrical cords or debris are in the path
of travel.