SkyCaddie SkyCaddie SGX, User Manual, Page: 15 / 30

15
• Tracking Shot Distance Within HoleVue: Using the Mark Ball button, mark your location prior to
taking your tee shot. Once marked, the SkyCaddie will display the total yards of the hole at the top
of the display. Additionally, the distance from your last mark (noted as “Mark” on the display) will
automatically update as you advance down the fairway. (See section “Determining Shot Distance”
for more instructions on marking your shots.)
• Recording Distance Off Tee: You can use the SGX
W
to store your driving distance. Press the Mark Ball button
before your tee shot and again when you arrive at the location of your tee shot (make sure to press “Mark” in
the confirmation screen). Next time you sync the driving distance will upload automatically to ClubSG™.
3.3.2 RangeVue™:
RangeVue™ displays preset yardage arcs on the HoleVue
and IntelliGreen screens and adjust dynamically over
fairway landing areas and over greens to allow you to
select the best club for every shot much more quickly.
RangeVue™ provides more information, faster and more
reliably than any laser rangefinder without aiming or
requiring line of sight.
By default, RangeVue is on. To toggle RangeVue on/off,
press the Info key.
3.3.3 QuickVue™:
QuickVue shows the safest path from the tee to green and displays hazards and reliable targets that
will come into play as you move down the course. The hazards and targets update automatically as you
move down the course.
• Identify the Hazards: QuickVue indicates hazards and targets by the following:
• White squares = hazards
• Blue squares = water
• Tall green rectangles = trees
• Red squares = tee-shot targets
• Knowing the Numbers: The “Tee Shot” distance plus the “Leaves” distance
provides the total distance from the tee box to the green following the safe
path down the fairway. The “Center” distance is the linear distance (a straight
line) from the tee box to the center of the green. If you add up the “Tee
Shot” distance and the “Leaves” distance, it will not be the same as “Center”
distance because they are displaying the distance to the green following two
different paths to the green.
QuickVue will display on courses where HoleVue is not available. For the SGX
W
,
QuickVue is turned “ON” by default and can be viewed on courses not currently
mapped with HoleVue.
To Toggle QuickVue On or Off
1. Go to “Menu” then select “Settings”
2. Under “Settings”, highlight “Targets” and select
3. Highlight “QuickVue” and select to toggle ON/OFF
If a course has both HoleVue and QuickVue, HoleVue will
display instead of QuickVue. To view QuickVue instead
of HoleVue:
1. Make sure QuickVue is set to ON (see above)
2. Under “Targets”, highlight “Target Views” and select
3. Highlight “HoleVue” and select. The black dot next
to “HoleVue” will disappear and it will be turned off
(see 3.3 for image reference)
QuickVue
Target preferences QuickVue setting
Note
On Par 4s and 5s, a yellow line
appears by default from the fairway
target to the green. To see the yellow
line from your location to the fairway
target, press the Mark Ball button.
As you approach the fairway target,
HoleVue will update and the yellow
line from the fairway target to the
green will disappear. To see it again,
you can create a custom target with
XTarget or use the Joystick to drag the
target down from the green.
Note
To toggle RangeVue on or off, simply
press the Info key.