Common problems and solutions
Technical specyfication
Before cleaning, ensure the power switch is turned off, and the attaching plug is pulled oyt of socket.
The rubber pedal and covers can be cleaned with cloth containing detergent, ant the detergent should be removed with a cloth.
NOTICE:
Do not clean the Product with corrosive detergent such as benzene or thinner, as it may cause fading,
corrosion or crack on the Product. Do not splash water into the product to avoid short circuit.
CONTROLLER: As wet cloth may cause malfunction of the controller, only dry cloth can be used.
Make sure that the power switch is turned off and the plug is removed from the power supply.
Clean off the dust and dirt on the Product and keep it clean and away from places with high temperatiree pr hogh humidity.
If the Product is not in use for a long period, a dustproof cover (but it yourself) shoul be applied on the Product to prevent the entry of
dust.
1. Emergency stop: Led on console s
hows ‘’ Er-3”, Led on PCB flashes three Times.
2.
Connection error: Led on console shows ‘’ER-4”, Led on PCB flashes four Times.
3.
Electron power tube demage: Led on console shows ‘’ER-5”, Led on PCB flashes five Times.
4.
Current Overload: Led on console shows ‘’ER-6”, Led on PCB flashes six Times.
5.
Engineer abnormality: Led on console shows ‘’ER-7”, Led on PCB flashes seven Times.
6.
Blocked Engineer: Led on console shows ‘’ER-8”, Led on PCB flashes eight Times.
7.
Low voltage: Led on console shows „ER-9”, Led on PCB flashes nine Times.
Rated voltage: 220-240 VAC 100-120 VAC
Rated power: 200 W
Rated frequency: 50/60 Hz
Maximum user weight: 150 kg
!
Storage and maintenance
Surface cleaning
Przechowywanie i konserwacja
Summary of Contents for SVP02
Page 1: ...SVP02 ...
