32
Photos:
This parameter is automatically set by setting
Video Length
and
Frame Rate
using the formula:
Photos = Video Length
x
Frame Rate
Frame Period (Sec):
You can set the
Frame Period
to select a desired interval between photos taken
rather than have it calculated for you based on other
parameters. Note that if you set
Photo Interval
and
Video Length
the app will re-calculate
Video Time
Span
. Anytime you are changing a parameter it is a
good idea to check its effects on the other ones
Swing Range (Deg):
Use
Swing Range
to create
an interesting swing or pendulum effect for your time-
lapse video. When used,
Star Adventurer 2i
will pan
to the limit of the
Swing Range
that you set, then pan
back to your starting point as many times as specified
in the
Swing Count
parameter. For instance, say you
have two interesting subjects that you want to feature
in your video. Set
Swing Range
to the angle between
them and
Swing Count
to 1, then point your camera
at the first subject. As the time-lapse video is being
recorded,
Star Adventurer 2i
will pan from the first
subject to the second subject then stop. By setting
Swing Count
to 2, it will pan to your second object,
then back to your first object, then stop. By using
Swing Range
values greater than 1 you can have
Star Adventurer 2i
pan back and forth multiple times
during the video. Set
Swing Range
to 0 for no panning
and to an even number to always end up where you
started.
Speed (Deg/Hr): Speed
determines how quickly
Star Adventurer 2i
will pan. In most cases, you do
not need to set this parameter unless you want to
control the panning speed but are not concerned with
the actual video time span. If you do not want
Star
Adventurer 2i
to pan in your time-lapse video then set
Speed
to 0.
Clockwise: ON
will cause
Star Adventurer 2i
to
rotate left to right (viewing down with the
Mounting
Platform
on top).
OFF
will cause
Star Adventurer 2i
to rotate right to left.
WiFi Off on Run:
When enabled,
Star Adventurer 2i
will automatically turn off Wi-Fi at the start of a task to
save power. Wi-Fi can be restored at any time in
APP
mode by pressing the
Right/Left Button
until
Button
LEDs
start slowly blinking.
Star Adventurer 2i will rotate left to
right if Clockwise is set to ON, or
right to left if Clockwise is set to
OFF
ON
OFF
