43
From time to time you may need to reset
Star Adventurer 2i
to its factory settings. For
instance, if you accidentally enter any incorrect Wi-Fi settings or If you have forgotten the
password, then you may need to restore
Star Adventurer 2i
to factory settings.
Follow the procedures listed below to restore the factory settings:
1. Turn the
Mode Dial
to
APP
mode
2. Press and hold both
Right/Left Button
simultaneously for about 5 seconds until button
LEDs start to blink fast.
3. Release both
Right/Left Button
and wait until button LED start to blink slowly.
4. Now all the factory setting has been restored. Please reestablish Wi-Fi communication
for normal operation. For details of default factory settings, please see following tables.
Factory Settings for Wi-Fi
Factory Settings for System Configuration
Factory Settings for preprogrammed Astro-photography modes
Factory Settings for preprogrammed Astro Time-Lapse
Operation Mode
Access Point Mode
SSID
SynScanWiFi_XXXXXX
Security
Open
WiFi Auto-off
Disabled
Auto-Run Task
Disabled
celestial tracking
solar tracking
lunar tracking
Exposure(sec)
120
0.5
0.5
Photo interval (sec)
5
1.5
1.5
Photos
Continuous
Continuous
Continuous
Tracking Rate
Sidereal
Solar
Lunar
Dithering Range
Disabled
Disabled
Disabled
WiFi Off on Run
Disabled
Disabled
Disabled
Exposure(sec)
30
Photos
300
Tracking Rate
Sidereal
WiFi Off on Run
Disabled
Appendix
Ⅳ
: How to Restore Factory Settings
