66
CLEANING
Clean your motorcycle regularly to protect the
surface finishes and inspect for damage, wear
and oil leakage.
Avoid cleaning products that are not specifically
designed for motorcycle or automobile surfaces.
They may contain harsh detergents or chemical
solvents that could damage the metal,paint,and
plastic on your motorcycle.
If your motorcycle is still warm from recent
operation, give the engine and exhaust system
time to cool off.
We recommend avoiding the use of high pressure
water spray (typical in coin operated car washes).
High pressure water (or air) can damage certain
parts of the motorcycle.
High pressure washer spray can damage certain
parts of your motorcycle. If you use a high
pressure washer, avoid spraying the following
areas:
Wheel Hubs
Muffler Outlet
Under Seat
Engine Stop Button
Under Fuel Tank
Drive Chain
Carburetor
Ignition Switch
NOTICE
SIDE STAND
Check the side stand spring for damage and loss
of tension,and the side stand assembly for
freedom of movement.
If the side stand is squeaky or stiff,clean the pivot
area and lubricate the pivot bolt with clean engine
oil.
(1)Side stand spring
(2)Side stand
(1)
(2)
65
