manualshive.com logo in svg

Sky Team ST125-11, Operation Instructions Manual, Page: 37 / 40

Share
Download
Sky Team ST125-11 Operation Instructions Manual Download Page 37

STORAGE GUIDE

Extended storage,such as for winter, requires that
you take certain steps to reduce the effects of
the motorcycle.In addition, necessary repairs
should be made BEFORE storing the
motorcycle; otherwise ,these repairs may be
forgotten by the time the motorcycle is removed
from storage.

STORAGE

1.Change the engine oil.
2.Drain the fuel tank and carburetor into an
approved petrol container.
Reinstall the fuel fill cap on the tank.

I f   s t o r a g e   w i l l   l a s t   m o r e   t h a n   o n e
month,carburetor draining is very important,to
assure proper performance after storage.

Petrol is highly flammable and explosive, you
can be burned or seriously injured when
handling fuel.
      Stop the engine and keep heat,sparks, and
flame away.
      Refuel only outdoors.
      Wipe up spills immediately.

WARINING

>

69

3.To prevent rusting in the cylinder, perform the
following:
      Remove the spark plug cap from the spark
plug.Using tape or string,secure the cap to any
convenient plastic body part so that it is
positioned away from the spark plug.
      Remove the spark plug from the engine and
store it in a  safe place.Do not connect the spark
plug to the spark plug cap.
      Pour a tablespoon (15-20cm3) of clean
engine oil into the cylinder and cover the spark
plug hole with a piece of cloth.
       Crank the engine several times to distribute
the oil.
       Reinstall the spark plug and spark plug cap

70

4.Wash and dry the motorcycle.Wax all painted
surfaces.Coat chrome with rust inhibiting oil.
5.Lubricate the drive chain
6.Inflate the tires to their recommended
pressures.Place the motorcycle on blocks to raise
both tires off the ground.
7.Cover the motorcycle (don't use plastic or other
coated materials) and store in an unheated area,
free of dampness with a minimum of daily
temperature variation. Do not store the motorycle
in direct sunlight.

REMOVAL FROM STORAGE

1.Uncover and clean the motorcycle.
Change the engine oil if more than 4 months have
passed since the start of storage.
2.Perform all Pre-ride Inspection checks.
3.Test ride the motorcycle at low speeds in a safe
riding area away from traffic.

Summary of Contents for ST125-11









































Reviews:

No comments