
Click
“Attitude”
tab from the left, and make sure you put “180” into the
“Roll” setting. This is very important, failing to do so will cause an instant
crash on your first flight.
Click
“Flight data”
tab from the bottom bar, check the hud and make sure it
corectly reflect all the movements of the ANAKIN.
WARNING:
PLEASE DO NOT MODIFY THESE SETTINGS UNLESS YOU
ARE FAMILIAR WITH CC3D AND KNOWS WHAT YOU ARE
DOING. SAVED MISCONFIGURE MAY CAUSE HARDWARE
ISSUES THAT BEYOND END USER’S REPARABILITY AND CAN
ONLY BE FIXED BY PCB REPLACEMENT.