
From the main interface, click the “File” menu and select “Import
UAV Settings”
Browse your computer to the file you have previously down-
loaded. It has an «.uav» extension and click “Open”.
Click “Save to Board Flash”, close it after the progress bar shows
100% done. Your ANAKIN 280 FPV is now upgraded with the
selected profile.
Please make sure to use a Sky-Hero profile file. You can
download OpenPilot profile file
on the Sky-Hero website.
FOR YOUNG PILOTS (beginners):
Early beginners setup:
http://www.sky-hero.com/softwares/PIDS/beginner.uav.zip
Gentle setup:
http://www.sky-hero.com/softwares/PIDS/anakin_rtf_15.02.02.uav.zip
FOR ADVANCED PILOTS:
Standard setup:
http://www.sky-hero.com/softwares/PIDS/intermediate.uav.zip
FOR EXPERTS:
Sky-Hero expert default:
http://www.sky-hero.com/softwares/PIDS/factory_pilot.uav.zip
Sky-Hero team pilot: Yves Coppye setup:
http://www.sky-hero.com/softwares/PIDS/anakin_yves_15.02.02.uav.zip
APPENDIX 1: LOAD A SKY-HERO ANAKIN PID PROFILE FILE (ADVANCED)
Download OpenPilot Software
(VERSION 15.02.02)
Windows NSIS installer :
http://www.sky-hero.com/softwares/OpenPilot/15.02.02/OpenPilot_WIN32_15.02.02.exe
Mac OS X distribution image :
http://www.sky-hero.com/softwares/OpenPilot/15.02.02/OpenPilot_MACOSX_15.02.02.dmg
Linux 32 bit Debian package :
http://www.sky-hero.com/softwares/OpenPilot/15.02.02/OpenPilot_LINUX32_15.02.02.deb
Linux 64 bit Debian package :
http://www.sky-hero.com/softwares/OpenPilot/15.02.02/OpenPilot_LINUX64_15.02.02.deb
Connect your computer to your ANAKIN 280 RTF Flight controller with a USB cable.
PLEASE NOTE THAT THE CC3D IS NOT SUPPORTED BY OPENPILOT IN RELEASES HIGHER THAN 15.02.02