
DA 820 LPC • DA 820 • ECT 820 • DCT 820 Fans
Technical User Guide
19
4.4 Cabling in the exhaust unit
Drill a hole in the exhaust unit duct for the fan cable and
pull it along a support to the same side as the motor con-
troller/frequency converter.
4.5 Cabling into the motor controller/frequency converter
In order to prevent water from running into the motor
controller/frequency converter via cables and screwed
connections, the cabling must be carried out so that it
can stand water around the cable in the gasket of the
screwed connection.