DA 600 LPC • DA 600 • ECT 632-6 • DCT 632-6
Technical User Guide
9
445099 DA
- 600-7 ON/OFF fan
230V3 50Hz
Three fan blades, 3x230 V fans with PAG fan blades.
It cannot be Triac regulated, and it is therefore used as an ON/OFF fan.
High pressure stability, high performance, and relatively high energy con-
sumption and noise level.
The fan is often used where high working pressure is required, for instance
in connection with under-floor exhaustion, air cleaning etc.
ErP 2015 approved.
445085 DA
600-7F-2 VFD fan 230V1 50/60Hz
This product consists of the fan a DOL 38-2 frequency converter.
The frequency controller reduces the energy consumption of the individual
fan at partial load compared with a similar triac-controlled fan.
High pressure stability, high performance, and relatively high energy con-
sumption.
The fan is often used where high working pressure is required, for instance
in connection with under-floor exhaustion, air cleaning etc.
The frequency converter included is controlled via a 10-0 V signal.
A pre-mounted, shielded cable used between the motor and the frequency
converter, is included. The distance between the frequency converter and
the motor must not exceed 5m. The supply to the frequency converter is not
dependent on a shielded cable.
ErP 2015 approved.
2.4 ECT/DCT 632-6
409143 ECT 632-6 Triac/ON/OFF 230V1 50 Hz
Five fan blades, 1x230 V adjustable fan with aluminium fan blades.
Can be used both as a stepless triac controlled fan and as an ON/OFF fan.
Low costs per m
3
/h.
High output and good pressure stability.
It should not be used for negative pressure higher than 40 Pa.
ErP 2015 approved.