
DA 600 LPC • DA 600 • ECT 632-6 • DCT 632-6
Technical User Guide
19
4.2.2 Terminals for supply of the fan motor
Remember to strip the cable so that the protective shield
from the fan can be connected to the motor controller
during mounting under the rail.
Connection from motor controller to fan motor.
4.2.3 Signal terminals
Not in use
Not in use
Ground
Not in use
Signal from controller
Ground
10-0 V = open
0-10 V = GND (Short-circuit connection between terminal 7 and
GND)
Stop = open
Start = GND (Short-circuit connection between terminal 8 and
GND)
Not in use
Ground