DA 600 LPC • DA 600 • ECT 632-6 • DCT 632-6
6
Technical User Guide
2 Product survey
2.1 DA 600 LPC
445070 DA 600 LPC 11-2 fan 230V1 50/60Hz
445072 DA 600 LPC 13-2 fan 230V1 50/60Hz
The motor controller is to receive a 10-0 V signal.
The fan comes with a 2-meter cable for the wiring between motor and motor
controller.
445927 DA 600 LPC cable set 5m can be ordered, if 2m is insufficient.
The power supply to the motor controller does not require a shielded cable.
It comes with motor controller, fan blades and fan suspension.
3-blade, 230 V adjustable fan.
To be applied if you require a low energy consumption, both at partial and
full load.
High output, extremely low power consumption and noise level, good regu-
lation ability as well as pressure stability.
• DA 600 LPC-11-2 lowest air output and power consumption
• DA 600 LPC-13-2 highest air output and power consumption
ErP 2015 approved.
445073 DA 600 LPC 11-2 fan 230V1 50/60Hz TH
The fan is the same as part no. 445070, but includes a thermal cutout.
445075 DA 600 LPC 13-2 fan 230V1 50/60Hz TH
The fan is the same as part no. 445072, but includes a thermal cutout.
The thermal circuit breaker ensures that the motor disconnects if it gets too
hot. For safety reasons, the fan must be connected manually before it can
be activated again.
Fans with thermal circuit breakers are normally only used in places where
this is a legal requirement, e.g. in Sweden.
ErP 2015 approved.