DA 1700 dual actuator
34
Technical User Guide
3.22.2 Mounting storm protection on outside safety net
Mount the storm protection on the outside safety net us-
ing:
• 2 x PT screws 6x20 torx 30
Make sure that the flaps can open and close when the
storm protection is mounted.
3.22.3 Mounting the storm protection wire for cone
85 mm
Used if outside safety net is not used.
Drill a ø5mm hole for wire at the top and bottom 85 mm
from the edge of cone.
Mount the steel wire on the cone using:
• 2 x washers ø6.4 washers
• 2 × wire lock 2-4 mm
Used if outside safety net is not used.