DA 1700 dual actuator
Technical User Guide
21
3.9 Mounting actuator
Place the dual actuator bracket for center pillar on the
center pillar.
Mount the dual actuator bracket for center pillar on the
center pillar using:
• 2 x M6x60 screw
• 4 x ø6.4/ø18x1.2 ø18 washers
• 2 x ø6/ 10x50 bushings
• 4 x ø10/ø16x9 rubber bushings
• 2 x M6 self-locking nut
Mount the dual actuator bracket for shutter in the inner-
most hole in the shutter using:
• 2 x M6x20 screw
• 4 x ø6.4/ø18x1.2 ø18 washers
• 2 x ø10.5x25x3 washers
• 2 x ø6/ø10x11.6 bushings
• 2 x M6 self-locking nut
Place a spirit level on the bracket for shutter.
Mark up the outermost hole.
• Drill a 10 mm hole in the shutter.
Mount the dual actuator bracket for shutter in the drilled
hole in the shutter using:
• 2 x M6x20 screw
• 4 x ø6.4/ø18x1.2 ø18 washers
• 2 x ø10.5x25x3 washers
• 2 x ø6/ø10x11.6 bushings
• 2 x M6 self-locking nut