Skov DA 1700, Technical User Manual, Page: 26 / 68

DA 1700 dual actuator
26 Technical User Guide
3.14 Mounting the motor in the fan housing
Mount motor with the two bottom motor suspensions in
the fan housing using:
• 2 x M6x80 screws
• 4 x ø6 washers
• 2 x bushings ø6/ø10x69.6
• 2 x M6 self-locking nuts
3.15 Mounting top motor suspension
Remove the lifting beam.
Mount the top motor suspension brackets to the motor
using:
• 2 x M6x80 screws
• 4 x ø6 washers
• 2 x bushings ø6/ø10x69.6
• 2 x M6 self-locking nuts
For more details see section Mounting bottom motor
suspension [ } 24]
Mount the motor suspension in the fan housing using:
• 2 x M6x80 screws
• 4 x ø6 washers
• 2 x bushings ø6/ø10x69.6
• 2 x M6 self-locking nuts
For more details see section Mounting the motor in the
fan housing [
}
26]
Tighten the eyebolt.
Make sure the blades can turn freely in the ventilation
duct.