Skov DA 1200 Wall Inlet, Mounting Manual

Page: 8 / 32

DA 1200 Wall Inlet
8
560195 DA 1200 operation set w. long U-shackle
Used where there are obstacles to the free movement of the
pull rod in the shape of disproportionate walls, steel rafters
etc., which project up to 70mm. The present differentiation
system cannot be used together with the set, for which reason
an extra line with spring is supplied to absorb slack. This
way, differentiation can be made.
The inlet flap is not to open more than to horizontal position,
as the winch motor may otherwise be overloaded.
1 unit per inlet.
9
433039 DA 1200 extension rod 240 mm
S433037B DA 1200 extension rod 400mm
Used where there are obstacles to the free movement of the
pull rod, which project more than 70mm from the wall. When
the extension rod is used, the pull rod lies 240/400 mm from
the wall, thus avoiding rafters, concrete poles and other
obstacles.
1 unit per inlet.
10
401902 DA 1000/1200 single operation set
When individual operation of each wall inlet is needed, the
DA 1200 single regulation set is mounted.
1 unit per inlet.
11
401935 Carrier roller f. pull rod, built-in inlet
Is used for built-in inlets.
If there are more than approx. 2 m between the inlets, the pull
rod will bend downwards causing inaccuracy if carrying
pulleys are not used.
1 unit by every 2 m free hanging pull rod.
12
401349 All-purpose holder for pull rod
Is used for flange inlets and built-in inlets.
If there are more than approx. 2 m between the inlets, the pull
rod will bend downwards causing inaccuracy if all-purpose
holders are not used.
1 unit by every 2 m free hanging pull rod.
13
433021 DA 1200 regulation set for 2 inlets
DA 1200 regulation set for two inlets in different heights.
One row of pull rods for each row of inlets is preferable, and
therefore the use of 433021 must be considered a cheaper
alternative.
1 unit per inlet in the upper row.