Skov DA 1200 Wall Inlet, Mounting Manual

Page: 17 / 32

2020.06.26
• 612321
Only when all reels have been mounted, the pull
rod is pushed into place.
Place the screw in the clamp on the pull rod.
Always place the clamp identically in relation to
the roller so there will be as little readjustment as
possible. The distance must be approx 85mm
when the ventilation system is closed.
Turn the cord holder (526046) so it is flush with
the bottom of the inlet.
Make sure that the roller for the pull rod can
rotate freely.
Place the cord in the upper line guide and on the
outer roller.