11
SKOPE TME-N ActiveCore
Electronic Controller
Service Manual
SCS Connect Field App and Track App
Connecting
Follow the procedures below to install and set-up the app, and connect to a
controller.
Note:
The SCS Connect Field app and Track app is separate from the
SKOPE-connect app.
To install the SCS Connect Field app
To connect to a controller
1. Download and install the Connect Field app or Track app from Google Play or
Apple Store (search for “scs wellington” to find it).
2. When you first run the app, you will be requested to enter an activation code.
Contact your Service Manager or SKOPE to receive your activation code
(you must be connected to the internet at the time of activation).
Your activation code is unique to you, and should NEVER be shared with
anyone else, as it determines your personal access level for the app. The
same code will give you access to all SCS apps you are authorised to use.
3. Once activation is complete, you must define a 4-digit PIN code. This can be
any code unique to you. Each time you start the app, you will be required to
enter this same PIN code. This is to prevent other people accessing the app
from unlocked phones.
4. You can see which databases you are activated against from the “Settings”
screen. You can be activated to more than one database at the same time.
Simply select ACTIVATE ANOTHER DATABASE, and enter the new
databases unique activation code, as in Step 2.
1. Check that the Bluetooth logo on the top right of the controller faceplate is lit,
indicating that the controller is ready to connect to a device.
Note:
A flashing Bluetooth logo indicates that the controller is currently
connected to a device.
2. Open the SCS Connect Field app.
3. Select a controller to connect to from the list of visible controllers.
Note:
This list is filtered by your activation permissions, so devices you are
not authorised to connect to will not be displayed.
4. Select ‘connect’ to connect to the controller.
5. Check that the Bluetooth logo on the top right of the controller faceplate is
flashing, indicating that the controller is connected.
