10
Electronic Controller
Service Manual
SKOPE TME-N ActiveCore
There are 5 main service mode categories when accessing and using
service mode via the controller faceplate:
Parameters
Provides access and editing of individual controller parameters.
It is not recommended that parameters are changed unless absolutely
necessary. If incorrect parameter settings are suspected, reload the
complete parameter set.
Reset
Returns the controller back to factory settings. Parameter set must be
reloaded after performing a reset.
Manual test
Allows inspection of input values from sensors, and check the effects of
output adjustments to peripherals, and to run preset test routines.
Statistics
Displays logged values and event counts to assist with fine tuning and
diagnostics.
About
Lists the properties of the refrigeration system and the controller, including
cooler model codes, firmware, hardware and software versions.
