9
SKOPE BME ActiveCore
Installation
User Manual
Repositioning
Shelves
When repositioning standard shelves, unload and remove the shelf,
establish the desired position and slide the shelf clip in each of the shelf
support strips to the desired position (see “To slide a shelf clip up and down”
on page 8). Sit the shelves on the shelf clips.
When repositioning shelves fitted with shelf lights, the height is adjusted as
per normal with the shelf clips. The shelves can be repositioned as far as the
shelf light cable reasonably allows via the fixed cut out in the side channel
cover (see procedure below).
To reposition shelves fitted with lights
1. Isolate the chiller from the power supply (see “Isolating Electrics” on
2. Remove product from the shelf required to be moved, and from the shelf
immediately above it.
3. Establish the desired shelf position.
4. Support the weight of the shelf and lift it up off the shelf clips. Be careful not
to damage the connected shelf light cables running through the front shelf
clips.
5. Slide the shelf clip in each of the shelf support strips to the desired position
(see “To slide a shelf clip up and down” on page 8).
The shelves can be repositioned as far as the shelf light cable reasonably
allows.
6. After the shelves have been securely positioned, connect cabinet to the
power supply and check for correct operation.
7. Reload the shelves with product.
