ISSUE DATE: NOVEMBER 2017
ORIGINATOR: SKILTEC
REPLACES ISSUE DATE:
APPROVED BY: D.ALTIPARMAKOVA
PAGE 24
PRODUCT INFORMATION MANUAL
SECTION: 9F-2 DUETTE
®
POWERVIEW
®
MOTORISATION
Removing the Shade, If Necessary
■
Lower the shade
approximately 100mm.
■
While holding the headrail, push
back on the bottom tab of the
installation bracket with a flat
blade screwdriver to release the
bottom edge of the headrail.
■
After releasing the bottom edge,
roll the back of the headrail down and out from the bracket.
Cleaning Procedures
Luxaflex
®
Duette
®
Shades are made of anti-static, dust-resistant fabric which repels dirt and
dust. For most honeycomb fabrics, the following cleaning options are available.
Dusting
■
Regular light dusting with a feather duster is all the cleaning that is needed in most
circumstances.
Vacuuming
CAUTION:
Do not vacuum Elan, Menage, and Myst fabrics.
■
For deeper cleaning, vacuum gently with a brush attachment.
Compressed Air/Hair Dryer (Cool Setting)
■
Use compressed air or a hair-dryer on a cool setting to blow dust and dirt off shades.
Spot-Cleaning
CAUTION:
Do not spot-clean Alexa, Elan, India Silk, Leela, Menage and Aurora fabrics.
■
Prepare a solution of warm water and a mild detergent.
■
Dampen a clean cloth in the solution and wring it out.
■
Dab the spot with the dampened cloth until it is removed. Do not rub the fabric.
■
Allow the shade to dry in the completely lowered position.
Headrail
Bracket
Back of
Shade
Remove
Bottom
Tab
Summary of Contents for Luxaflex Duette PowerView 9F-2
Page 2: ......
