ISSUE DATE: NOVEMBER 2017
ORIGINATOR: SKILTEC
REPLACES ISSUE DATE:
APPROVED BY: D.ALTIPARMAKOVA
PAGE 10
PRODUCT INFORMATION MANUAL
SECTION: 9F-2 DUETTE
®
POWERVIEW
®
MOTORISATION
■
Attach the installation or extension brackets using the screws provided.
IMPORTANT:
The front edges of the brackets
must be level and aligned to each other.
■
If using spacer blocks, attach the spacer block/installation bracket assembly to a flat vertical
mounting surface with a #6 mounting screw long enough for a secure installation.
➤
A maximum of 38mm of spacer blocks per
installation bracket is recommended. Spacer
blocks and shims may be stacked.
➤
The top of the spacer blocks should be at the
desired shade height.
IMPORTANT:
For 38mm pleat size, 6mm rear clearance
and a minimum of 13mm spacer block is recommended.
CAUTION:
Use drywall anchors when mounting
into drywall.
■
If using extension brackets, attach an installation
bracket to the underside of each extension bracket
using the provided screws and speed nuts.
Proceed to “STEP 2 — Install the Shade” on page 12.
Longer Screw
(Not Provided)
Maximum
38mm
Summary of Contents for Luxaflex Duette PowerView 9F-2
Page 2: ......
