17
Tools needed for assembly and adjustment
WARNING
Disconnect the plug from the power source before performing any
assembly, adjustment or repair to avoid possible injury .
Blade Wrenches (supplied)
Framing Square
(not supplied)
3/4” board with
straight top edge
Drawn line
No gap or
overlap
1.Position square
and draw a light line
2.Flip square (shown in
dotted position)
3.Check edge of flipped
square against the drawn
line. There should be no gap
or overlap at the bottom end.
10mm Wrench
(not supplied)
Double-Ended Allen
Wrench, 6mm Hex,
with PH2 Phillips end
(supplied)
COMBINATION SQUARE MUST BE TRUE
Combination Square
(not supplied)
2 .5mm/5mm Hex
Wrench (not supplied)
Fig. 4
