11
-
switch on the tool by pulling trigger B
-
control the speed steplessly from zero to maximum by
putting less or more pressure on the trigger
-
switch off by releasing trigger B
•
Locking knob A can be activated
9
-
if activated, the on/off switch is blocked and the
machine is secured against being switched on
unintentionally
•
Mounting saw blade
w
! remove battery from tool before making any
adjustments or changing accessories
-
turn blade clamp C in same direction as arrow D on tool
and hold it in that position
-
insert blade (with teeth facing down or up) to full depth
-
release blade clamp C
-
push in and pull out blade to check whether it is locked
correctly
•
Removing saw blade
w
! remove battery from tool before making any
adjustments or changing accessories
-
turn blade clamp C in same direction as arrow D on tool
and hold it in that position
-
pull out blade
-
release blade clamp C
•
Orbital action for fast cutting
e
-
for activating the orbital action of the saw blade use
switch N as illustrated
! do not activate the orbital action when cutting
metal
•
Operating the tool
! securely clamp the workpiece
-
mark the cutting line on the workpiece
-
mount battery on tool
-
hold the tool with one hand on handle E and the other
on the insulated barrel grip F
-
switch on the tool
-
guide the tool along the marked cutting line
-
keep footplate G firmly against the workpiece to
minimize counter-force and vibration
•
Holding and guiding the tool
! while working, always hold the tool at the grey-
coloured grip area(s)
r
-
keep ventilation slots H uncovered
-
do not apply too much pressure on the tool; let the tool
do the work for you
! ensure that the saw blade extends beyond the
work throughout the stroke
t
•
Adjusting effective sawing depth
y
! remove battery from tool before making any
adjustments or changing accessories
-
use hex key K for loosening and fastening both
fastening bolts J
-
slide footplate G forward/backwards in order to enlarge/
reduce the effective sawing depth
APPLICATION ADVICE
•
Plunge cutting
u
Plunge cuts can be made in wood and other soft
materials without pre-drilling a hole
-
use a thick saw blade
! remove battery from tool before making any
adjustments or changing accessories
-
mount the blade with the teeth facing upward
-
mark desired cutting line on the workpiece
BATTERIES
• The battery supplied is partially charged
(to ensure
full capacity of the battery, completely charge the battery
in the battery charger before using your power tool for the
first time)
• Only use the following batteries and chargers with
this tool
-
SKIL battery: BR1*31****
-
SKIL charger: CR1*31****
•
Do not use the battery when damaged; it should be
replaced
•
Do not disassemble the battery
•
Do not expose tool/battery to rain
•
Permitted ambient temperature (tool/charger/battery):
-
when charging 4...40°C
-
during operation –20...+50°C
-
during storage –20...+50°C
EXPLANATION OF SYMBOLS ON TOOL/BATTERY
3
Read the instruction manual before use
4
Batteries may explode when disposed of in fire, so do not
burn battery for any reason
5
Store tool/charger/battery in locations where temperature
will not exceed 50°C
6
Do not dispose of electric tools and batteries together
with household waste material
USE
•
Charging battery
! read the safety warnings and instructions
provided with the charger
•
Removing/installing the battery
2
•
Battery level indicator
7
-
press the battery level indicator button L to show the
current battery level
7
a
! when the lowest level of the battery indicator
starts flashing after pressing button L
7
b, the
battery is empty
!
when 2 levels of the battery indicator start flashing
after pressing button L
7
c, the battery is not
within the allowable operating temperature range
•
LED light
8
LED-light automatically lights on when activating the on/
off switch
!
when LED-light starts flashing, the battery
protection is activated (see below)
•
Battery protection
The tool is suddenly being switched off or prevented from
being switched on, when
-
the load is too high
--> remove load and restart
-
the battery temperature is not within the allowable
operating temperature range of -20 to +50°C
--> 2
levels of the battery level indicator start flashing when
pressing button L
7
c; wait until battery has returned
within the allowable operating temperature range
-
the battery is nearly empty (to protect against
deep discharge)
--> a low battery level or flashing low
battery level
7
b is shown by the battery level indicator
when pressing button L; charge battery
!
do not continue to press the on/off switch after the
tool is switched off automatically; battery may be
damaged
•
Combined switch for on/off and speed control with
locking knob
9
q
-
first unlock by pressing knob A
Summary of Contents for 3480
